SmartSolar charge controller

9.9.2021
SmartSolar charge controller

https://www.victronenergy.com/panel-systems-remote-monitoring/victronconnect








Probably the most important initial security action to do for any connected device is to change default PIN codes, passwords etc.




Victron charger





Comments

Post a Comment

Popular posts from this blog

Telive-2 how-to

Image
Oracle VirtualBox Debian 12 clean install sudo apt install rtl-sdr sudo apt install wireshark sudo apt install xterm sudo apt install audacious https://github.com/sq5bpf/telive-2 download: https://github.com/sq5bpf/telive-2/tree/main/scripts/install_telive.sh or wget it chmod 755 install_telive.sh ./install_telive.sh set desired frequency teliveusr@debian:~/tetra/telive-2/gnuradio-companion/python3_based_gnuradio$ nano telive_1ch_simple_gr310_udp_xmlrpc.grc     open 2 terminal windows run GNU Radio Companion, load and execute the grc in terminal window 1 run teliveusr@debian:~/tetra/osmo-tetra-sq5bpf-2/src$ ./receiver1udp in terminal window 2 run teliveusr@debian:~/tetra/telive-2$ ./rxx   receiver1 and receiver2 require simdemod2.py. It can maybe copied from original telive src teliveusr@debian:~/tetra/osmo-tetra-sq5bpf-2/src/demod$ ls __pycache__  simdemod3_telive.grc  simdemod3_telive.py  simdemod3_telive_send_udp_to_telive.py
Read more

Inspecting Alinco DJ-X100E firmware updater

Image
DJ-X100E(CPU 4.00-004 _DSP 1.07).exe dotPeek, Visual Studio 2022, Detect It Easy Detect It Easy  Motorola S-record inside (DIE Strings view)   DIE save Strings to file   dotPeek to Visual Studio solution. Renesas microcontroller? BIN file inside VS solution. VS can show its content in HEX and ASCII   Python code for extracting S-record lines from the DIE strings file fin = open("G:\\DJ-X100E(CPU 4.00-004 _DSP 1.07).exe.Strings.txt", mode="r", encoding="utf8") fout = open("G:\\DJ-X100E-SREC.txt", mode="w", encoding="utf8") arr = ["S00", "S311", "S315", "S309", "S30B", "S307", "S30C", "S30F", "S30E", "S30D", "S705", "S306"] while True:     line = fin.readline()     if not line:         break     for item in arr:         i = line.find(item)         if i > -1:             fout.write(line[i:])             break...
Read more

Modifying LILYGO T3 LoRa32 RTL_433 ESP OOK receiver example - log found devices to file

https://techcoderadio.blogspot.com/2025/10/modifying-lilygo-t3-lora32-rtl433-esp.html   https://github.com/NorthernMan54/rtl_433_ESP   Log found devices to file (SD card) appendFile(SD, "/rtl433data.txt", JSONmessageBuffer); bin files: https://github.com/OH1GIU-P/ESP32-RTL433ESP-logger-firmware   /*  Basic rtl_433_ESP example for OOK/ASK Devices */ #include <ArduinoJson.h> #include <ArduinoLog.h> #include <rtl_433_ESP.h> #include <wire.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #include <SD.h> #include <FS.h> #include <SPI.h> #ifndef RF_MODULE_FREQUENCY #  define RF_MODULE_FREQUENCY 433.92 #endif #define JSON_MSG_BUFFER 512 #define LED_SDA 21 #define LED_SCL 22 #define LED_RST -1 #define SD_CS   13 #define SD_MOSI 15 #define SD_SCK  14 #define SD_MISO 2 #define SCR_W 128 #define SCR_H 64 Adafruit_SSD1306 display(SCR_W, SCR_H, &Wire, LED_RST); bool bLED = false; bool bSD = fa...
Read more